Solidator Clear Tough Resin
Solidator Tough Resin is available in transparent, grey, white and black.
The material is very impact-resistant and flexible and is ideal for housings and orthoses.
Material properties:
| Key figure | Method | Symbol | |
|---|---|---|---|
| Solidator Tough | |||
| Applications | Electronic housings, connectors, functional parts | ||
| Physical properties | |||
| Shore hardness D | DIN EN ISO 48-4 | D | 78 |
| Solid density | DIN EN ISO 1183-1 | ρ | 1.21 g/cm³ |
| Tensile properties | |||
| Tensile module | ASTM D638, Type I | Et | |
| Tensile strength | ASTM D638, Type I | σM | 45 MPa |
| Elongation at tensile strength | ASTM D638, Type I | εM | |
| Elongation at break | ASTM D638, Type I | εtB | |
| Bending properties | |||
| Bending modulus | ASTM D790 | Ef | |
| Flexural strength | ASTM D790 | σfM | |
| Elongation in bending for flexural strength | ASTM D790 | εfM | |
| Elongation at break | ASTM D790 | εfB | > 5.0 % |
| Impact resistance properties | |||
| Izod notched impact strength | ASTM D256 | aiN | |
| Thermal properties | |||
| Temperature of dimensional stability @ 0.45 N/mm² | ASTM D 648 (B) | Tf | |
| Glow wire flammability rating | DIN EN 60695-2-12 | GWFI | |
| Glass transition temperature | DIN EN ISO 11359 | Tg | |
| Linear coefficient of expansion -20°C ... 20°C | DIN EN ISO 11359 | α | |
| Linear coefficient of expansion 65°C ... 80°C | DIN EN ISO 11359 | α | |
| Curl / Vertical Distortion | |||
| Dimensional accuracy XY | Test print (100x100x6mm) | 99,94% | |
| Curl at test bar(200x20x5mm) | Vertical alignment of the print | 0mm | |
| Curl at test bar (200x20x5mm) | Horizontal alignment of the print | 0.02 mm | |
| Printing conditions: Printed on Solidator 8K, layer height 100 micrometres, cleaned in IPA for 1 min, cleaned with compressed air, UV post-curing with Solidator Cure Box | |||