Solidator White Resin (R051)

The white resin is particularly suitable for architectural models. It offers high impact strength, low warpage and high form stability. This also allows the use as functional components.

Material properties:

Key figure	Method	Symbol	R051
Key figure	Method	Symbol	White
Applications			Fashion, Architecture, Art
Physical properties
Shore hardness D	DIN EN ISO 48-4	D	80,2
Solid density	DIN EN ISO 1183-1	ρ	1.21 g/cm³
Tensile properties
Tensile module	ASTM D638, Type I	Et	-
Tensile strength	ASTM D638, Type I	σM	33.0 MPa
Elongation at tensile strength	ASTM D638, Type I	εM	-
Elongation at break	ASTM D638, Type I	εtB	-
Bending properties
Bending modulus	ASTM D790	Ef	-
Flexural strength	ASTM D790	σfM	-
Elongation in bending for flexural strength	ASTM D790	εfM	-
Elongation at break	ASTM D790	εfB	>5%
Impact resistance properties
Izod notched impact strength	ASTM D256	aiN	-
Thermal properties
Temperature of dimensional stability @ 0.45 N/mm²	ASTM D 648 (B)	Tf	-
Glow wire flammability rating	DIN EN 60695-2-12	GWFI	-
Glass transition temperature	DIN EN ISO 11359	Tg	-
Linear coefficient of expansion -20°C ... 20°C	DIN EN ISO 11359	α	-
Linear coefficient of expansion 65°C ... 80°C	DIN EN ISO 11359	α	-
Curl / Vertical Distortion
Dimensional accuracy XY	Test print (100x100x6mm)		99,71%
Curl at test bar (200x20x5mm)	Vertical alignment of the print		0mm
Curl at test bar (200x20x5mm)	Horizontal alignment of the print		0.05 mm
Printing conditions: Printed on Solidator V3+, layer height 100 microns, 3min cleaned in isopropanol, compressed air cleaned, UV post-curing with Solidator Cure Box.