Solidator Functional Grey Resin (R031)
R031 Solidator Functional Gray is much stronger, stiffer and more resistant to deformation than polyamide (PA12), but still offers sufficient impact strength and flexibility for snap connections. It is also the material with the highest processing speed on the Solidator 3+. It is characterised by extreme dimensional stability in all directions. It is suitable for connectors, housing parts, brackets and especially for functional parts. It also offers high heat resistance.
Material properties:
| Key figure | Method | Symbol | R031 |
|---|---|---|---|
| Functional Grey | |||
| Applications | Mechanical and functional parts, connectors and brackets | ||
| Physical properties | |||
| Shore hardness D | DIN EN ISO 48-4 | D | 82 |
| Solid density | DIN EN ISO 1183-1 | ρ | 1.21 g/cm³ |
| Tensile properties | |||
| Tensile module | ASTM D638, Type I | Et | 3080 MPa |
| Tensile strength | ASTM D638, Type I | σM | 66.2 MPa |
| Elongation at tensile strength | ASTM D638, Type I | εM | 2,90 % |
| Elongation at break | ASTM D638, Type I | εtB | 3,23 % |
| Bending properties | |||
| Bending modulus | ASTM D790 | Ef | 2630 MPa |
| Flexural strength | ASTM D790 | σfM | 103 MPa |
| Elongation in bending for flexural strength | ASTM D790 | εfM | 4,20 % |
| Elongation at break | ASTM D790 | εfB | > 5.0 % |
| Impact resistance properties | |||
| Izod notched impact strength | ASTM D256 | aiN | 1.37 kJ/m² (13.93 J/m) |
| Thermal properties | |||
| Temperature of dimensional stability @ 0.45 N/mm² | ASTM D 648 (B) | Tf | 68.6 °C |
| Glow wire flammability rating | DIN EN 60695-2-12 | GWFI | 650 °C / 3.1 mm |
| Glass transition temperature | DIN EN ISO 11359 | Tg | 56 |
| Linear coefficient of expansion -20°C ... 20°C | DIN EN ISO 11359 | α | 80 * 10-6 K-1 |
| Linear coefficient of expansion 65°C ... 80°C | DIN EN ISO 11359 | α | 203 * 10-6 K-1 |
| Curl / Vertical Distortion | |||
| Dimensional accuracy XY | Test print (100x100x6mm) | 99,83% | |
| Curl at Test bar (200x20x5mm) | Vertical alignment of the print | 0mm | |
| Curl at test bar(200x20x5mm) | Horizontal alignment of the print | 0.015 mm | |
| Printing conditions: Printed on Solidator V3+, layer height 100 microns, 3min cleaned in isopropanol, compressed air cleaned, UV post-curing with Solidator Cure Box. | |||