Solidator Dental Model Resin
Solidator Dental Model Resin Dental Resin ist is a high-quality material used in dentistry to create precise models of teeth and jaw structures. It is characterised by its excellent attention to detail, making it an ideal choice for dental modelling requirements.
Material properties:
| Key figure | Method | Symbol | R090 |
|---|---|---|---|
| Dental Model | |||
| Applications | Modelling dental technology | ||
| Physical properties | |||
| Shore hardness D | DIN EN ISO 48-4 | D | 77 |
| Solid density | DIN EN ISO 1183-1 | ρ | 1.18 g/cm³ |
| Tensile properties | |||
| Tensile module | ASTM D638, Type I | Et | 2300 |
| Tensile strength | ASTM D638, Type I | σM | 38 MPa |
| Elongation at tensile strength | ASTM D638, Type I | εM | |
| Elongation at break | ASTM D638, Type I | εtB | |
| Bending properties | |||
| Bending modulus | ASTM D790 | Ef | 1900 |
| Flexural strength | ASTM D790 | σfM | 71 |
| Elongation in bending for flexural strength | ASTM D790 | εfM | |
| Elongation at break | ASTM D790 | εfB | > 5.0 % |
| Impact resistance properties | |||
| Izod notched impact strength | ASTM D256 | aiN | |
| Thermal properties | |||
| Temperature of dimensional stability @ 0.45 N/mm² | ASTM D 648 (B) | Tf | 55°C |
| Glow wire flammability rating | DIN EN 60695-2-12 | GWFI | |
| Glass transition temperature | DIN EN ISO 11359 | Tg | |
| Linear coefficient of expansion -20°C ... 20°C | DIN EN ISO 11359 | α | |
| Linear coefficient of expansion 65°C ... 80°C | DIN EN ISO 11359 | α | |
| Curl / Vertical Distortion | |||
| Dimensional accuracy XY | Test print (100x100x6mm) | 99,98% | |
| Curl at test bar(200x20x5mm) | Vertical alignment of the print | 0mm | |
| Curl at test bar (200x20x5mm) | Horizontal alignment of the print | 0.01 mm | |
| Printing conditions: Printed on Solidator 8K, layer height 100 microns, 3min cleaned in isopropanol, compressed air cleaned, UV post-curing with Solidator Cure Box x | |||